• Material: Metal Coated With Powder Paint And Impact-Resistant, Chemically Resistant Polycarbonate
• Lamps Material: Special Glass
• Purpose: Air Disinfection With A Volume Of Up To 50 Cubic Meters
• Qualities: 5 Working Options, Possible Both In A Fixed And Mobile Version, High Transmittance Of Bactericidal Ultraviolet Rays
• Weight: 10 kg
• Dimensions: 755 x 115 x 170 mm
• Temperature: +10 C To + 35 C
• Relative Humidity: 80% At A Temperature Of 25 C
• Pressure: 630-800 mm. rt. Art
• Volume: 50 Cubic
• Country of Manufacture: Israel
  
• Package Include: DSI UV Light Air Recirculator

DSI UV Light Air Recirculator is designed for air disinfection with a volume of up to 50 cubic meters in healthcare facilities and more. This device has 5 different working options including the non-stop working option that allows people to be located in the room. UV Light Air Recirculator works with two 15 W lamps used to reduce the level of microbes in the air, especially effective against different airborne microbes and germs SARS, COVID-19 and other viruses. The operation of the recirculator possible both in a fixed and mobile version. The wall-mounted feed can be fixed horizontally or vertically.

Technical characteristics:

• The recirculator operates from an alternating current with a voltage of 220 ± 22 V, a frequency of 50 Hz.
• The power consumed by the recirculator from the alternating current network is not more than 200 VA.
• Irradiation from a UV radiation source at a distance of 1 m at a wavelength in the range of 253.7 nm is not less than 1 W / m2. The source of UV radiation is two 15W low-pressure germicidal mercury lamps, which do not generate ozone during combustion.
• The lamps made from special glass, which has high transmittance of bactericidal ultraviolet rays, and at the same time absorbs radiation below 200 nm, which forms ozone from the air. Due to this, an extremely small ozone formation is recorded (within the MPC), which disappears completely after about 100 hours of lamp operation.
• Average lamp life with proper use and maintenance is at least 9000 hours.
• The time of continuous operation of the recirculator is no more than 7 days. The interval between switching on is not regulated.
• The time for the recirculator to reach the operating mode should be no more than 1 min.
• Average service life is not less than 5 years.
  
• The outer surfaces of the recirculator are made of metal coated with powder paint and impact-resistant, chemically resistant polycarbonate and can be disinfected by wiping with disinfectants.